Catalogue images illustrate reference configurations. Please confirm BRONRY availability, final appearance, materials and performance specifications for your project.
Snap-fit protective vent
Threaded, snap-fit and recessed formats for equipment enclosures.
Application-led selection
Snap-fit or recessed installation; verify the opening, wall thickness and seal compression.
A closer look at the specification.
Reference catalogue values for this configuration. Confirm the final BRONRY specification and test report before use.
View reference source ↗| Airflow | 2 L/min |
|---|---|
| Ingress protection | IP67; 1 m immersion for 30 minutes; no water ingress stated |
| Membrane material | Expanded PTFE (ePTFE) |
| Membrane properties | Water protection, Dust protection, Breathable |
| Housing color | Black |
| Temperature range | -40 °C to 125 °C |
| Body & cap material | PC |
An airflow value without a stated pressure differential cannot be directly compared with another test. Component IP information does not establish the rating of your finished enclosure.
Check the interface before integration.
Reference illustrations may contain Chinese annotations. They are for format comparison; use the approved drawing for production and tooling.
Good integration starts with the interface.
- Check the opening, wall thickness and sealing surface against the product drawing.
- Press the component into place using the specified load-bearing surfaces.
- Confirm that retaining features engage fully and seals are not pinched.
- Verify retention, water protection and airflow after assembly.
Questions before you specify?
How do I choose a vent?+
Start with the mounting interface, enclosure volume, temperature, exposure and target airflow. Evaluate the chosen configuration in the complete assembly.
What determines airflow?+
Membrane structure, exposed area and pressure differential all affect flow. Compare data only when units and test conditions are aligned.
Does an IP rating apply to my finished product?+
A component result does not establish the rating of the complete enclosure. Seals, mounting and other openings must be tested as part of the final assembly.
Can a vent eliminate condensation?+
Venting can support pressure and moisture exchange. Condensation also depends on temperature, humidity, enclosure geometry and operating conditions.
Related configurations
PV-Z3 snap-fit protective vent
View configuration →
Recessed protective vent
View configuration →