Catalogue images illustrate reference configurations. Please confirm BRONRY availability, final appearance, materials and performance specifications for your project.
OD15 packaging vent plug
Plug formats for packaging containers and automotive systems.
Application-led selection
Plug interface; confirm the opening, insertion depth and sealing arrangement.
A closer look at the specification.
Reference catalogue values for this configuration. Confirm the final BRONRY specification and test report before use.
View reference source ↗| Airflow | 0.5 L/min@1.2 kPa |
|---|---|
| Pressure resistance | >200 mbar |
| Membrane material | Expanded PTFE (ePTFE) |
| Membrane properties | Water protection, Dust protection, Breathable, Oil resistance |
| Membrane color | White |
| Temperature range | -40 °C to 125 °C |
| Material | HDPE |
An airflow value without a stated pressure differential cannot be directly compared with another test. Component IP information does not establish the rating of your finished enclosure.
Check the interface before integration.
Reference illustrations may contain Chinese annotations. They are for format comparison; use the approved drawing for production and tooling.
Good integration starts with the interface.
- Match the plug to the port and intended liquid or gas exposure.
- Keep the membrane and sealing surfaces clean during insertion.
- For packaging, evaluate the filled container and closure together under transport and storage conditions.
- Confirm leak resistance, compatibility and venting performance with the actual contents.
Questions before you specify?
How do I choose a vent?+
Start with the mounting interface, enclosure volume, temperature, exposure and target airflow. Evaluate the chosen configuration in the complete assembly.
What determines airflow?+
Membrane structure, exposed area and pressure differential all affect flow. Compare data only when units and test conditions are aligned.
Does an IP rating apply to my finished product?+
A component result does not establish the rating of the complete enclosure. Seals, mounting and other openings must be tested as part of the final assembly.
Can a vent eliminate condensation?+
Venting can support pressure and moisture exchange. Condensation also depends on temperature, humidity, enclosure geometry and operating conditions.
Related configurations
PV-Z3 snap-fit protective vent
View configuration →
Venting ring for truck urea tanks
View configuration →